What this Sourdough Hydration Calculator does
The Sourdough Hydration Calculator estimates the percentage of water in a dough relative to its flour. It includes water and flour contributed by the starter, which makes the result useful when comparing formulas or adjusting a recipe. Enter ingredient weights in grams and the starter’s hydration percentage. The result is a dough hydration percentage.
The description for this calculator assumes starter hydration is entered as a percentage by weight. A 100% hydration starter contains equal weights of water and flour. For example, 100 grams of that starter contributes 50 grams of water and 50 grams of flour to the dough. The calculator separates those portions mathematically before adding them to the recipe’s added water and flour.
Hydration is a planning measure, not a complete prediction of how dough will feel or bake. Flour type, mixing, fermentation, temperature, and handling also affect dough behavior. Use the calculated percentage to understand the formula, then observe how your own ingredients behave.
How to use the Sourdough Hydration Calculator
Weigh each ingredient rather than estimating by volume. Cups can hold different amounts depending on how flour is scooped or settled, so grams make the calculation easier to repeat. Enter water and flour added directly to the dough, followed by the total weight of starter and its hydration percentage.
- Added water: enter the water in the recipe, in grams.
- Added flour: enter the flour in the recipe, in grams. The calculator requires at least 1 gram so the total flour cannot be zero.
- Starter weight: enter the starter’s full weight, including its water and flour.
- Starter hydration: enter the starter’s water-to-flour percentage. Use 100 for equal weights of water and flour.
For a worked example, suppose a recipe has 350 g added water and 500 g added flour, plus 100 g of starter at 100% hydration. The starter contributes 100 × 100 ÷ (100 + 100), or 50 g water, and 100 × 100 ÷ (100 + 100), or 50 g flour. Total water is 400 g and total flour is 550 g. The formula gives 400 ÷ 550 × 100, which is 72.73% hydration.
If your recipe lists a preferment or levain separately, include its complete weight as starter only if its hydration is known and consistent. Add other water and flour to the respective recipe fields. Keep units consistent, since the formula expects all ingredient weights in grams.
How the Sourdough Hydration Calculator formula works
The formula calculates total water divided by total flour, then multiplies by 100 to express the ratio as a percentage. It first derives the starter’s water and flour portions from the starter’s total weight and hydration value.
For starter weight S and starter hydration H, the water portion is S × H ÷ (100 + H). The flour portion is S × 100 ÷ (100 + H). At 100% hydration, both portions are half the starter weight. At a lower percentage, the starter contains proportionally less water. At a higher percentage, it contains proportionally more.
The calculator then adds starter water to the added water and starter flour to the added flour. Its final calculation is (total water ÷ total flour) × 100. This method treats hydration as a baker’s percentage: water weight compared with flour weight. Salt and other ingredients do not enter this particular ratio.
The input limits allow up to 5,000 g each for added water and flour, up to 2,000 g of starter, and starter hydration from 0% to 200%. These ranges cover many home baking formulas while keeping the values finite. The minimum added flour ensures the denominator remains positive, including when starter weight is zero.
Use cases for the Sourdough Hydration Calculator
The calculator can help when you want to compare two sourdough formulas on the same basis. Recipes may list different quantities of starter, and the starter itself contains flour and water. Counting only the water poured into the mixing bowl can therefore understate the actual hydration. Including starter contributions gives a more complete percentage.
It is also useful when scaling a recipe. If you double or halve every ingredient, the hydration percentage should remain the same. If the result changes after scaling, check that all ingredient weights were adjusted consistently and that the starter hydration was entered correctly.
When adapting a recipe to a different starter, use the new starter’s actual hydration if you know it. A stiff starter and a liquid starter do not contribute the same amounts of water and flour at equal total weights. Recalculate before deciding whether to change the dough’s added water.
Hydration can support a baking log. Record the result alongside flour blend, room conditions, fermentation time, and handling notes. Over several bakes, those observations help explain why doughs at similar percentages can still feel different.
Other factors to consider when calculating dough hydration
Hydration describes a ratio, but flour absorbs water differently. Whole-grain flour often takes up water differently from refined bread flour, while rye and specialty grains can change dough texture as well. Protein content, milling, age, and storage conditions also matter. A percentage that feels manageable with one flour blend may feel sticky or firm with another.
Room temperature and fermentation influence handling, too. A dough can become looser as fermentation proceeds, and mixing or folds can change its strength. Salt, seeds, grains, sweeteners, fats, and other additions can affect dough behavior even though they are excluded from this water-to-flour calculation.
Some bakers count water from ingredients such as milk, fruit, or cooked grains, while others use a simpler flour-and-water convention. This calculator only includes the water and flour represented by the four inputs. If your formula contains substantial liquid or flour from additional ingredients, the displayed percentage will not account for them unless you incorporate those amounts into the added water and flour fields under the same measurement convention.
Starter hydration is only as accurate as the value you enter. If it is maintained by weight with equal flour and water additions, 100% may be appropriate. If feedings use different ratios or ingredients, calculate its hydration from the actual water and flour content rather than relying on its name or appearance.
Frequently asked questions
What does 100% sourdough starter hydration mean?
It means the starter has equal weights of water and flour. A 100 g starter at 100% hydration contributes 50 g water and 50 g flour in this calculator’s formula.
Does the calculator include starter flour?
Yes. It splits starter weight into water and flour according to the entered starter hydration, then includes both portions in the total dough calculation.
Why is my result different from a recipe’s stated hydration?
Recipe authors may use different conventions, such as excluding starter contributions or counting other liquid ingredients. Compare the ingredient weights and method before interpreting a difference.
Can I enter ounces instead of grams?
The input labels specify grams, so convert every ingredient weight to grams before entering values. Mixing units would produce an incorrect percentage.
Does a higher hydration guarantee an open crumb?
No. Hydration alone does not determine crumb structure. Flour, fermentation, dough strength, shaping, and baking all influence the final loaf.